<dd id="juqeb"><optgroup id="juqeb"></optgroup></dd>

    1. <ol id="juqeb"></ol><em id="juqeb"><acronym id="juqeb"><input id="juqeb"></input></acronym></em>
    2. <em id="juqeb"></em>
    3. <dd id="juqeb"><pre id="juqeb"></pre></dd>
            產品列表
      路沿石鋼模具
      蓋板鋼模具
      標志樁鋼模具
      隔離墩鋼模具
      化糞池鋼模具
      U型槽鋼模具
      遮板鋼模具
      道軌模具
      護坡鋼模具
      制磚機
      檢查井鋼模具
      聲屏障鋼模具
      防撞墻鋼模具
      圍墻板模具
      方涵模具
      錨桿框架梁模具
      配重塊模具
      水泥三盤模具
      水泥預制件模具
            新聞中心
      · 整體式檢查井模具的作用及結...
      · 水泥檢查井模具的優勢特點
      · 觀察井模具的結構及特點
      · 檢查井模具的規格、尺寸、特...
      · 路面板模具在道路施工中的重...
      · 裝配式路面板模具的施工方式
            聯系我們

      電話:0312-8103818 18803129528
      傳真:0312-8103818
      在線QQ:107108222
      地址:保定市城東工業區

           新聞中心

      集水井模具的環保工作是如何實施的

      [關閉該頁][設為首頁][添加收藏][發送朋友][打印][ ]

      集水井模具是通過精密的焊接技術實現生產的,而為了保證集水井模具的質量,集水井模具,方形集水井模具,圓形集水井模具廠家通常是根據客戶所需要的模具規格進行分類,比如內徑1米以下的使用3毫米的鋼板,而內徑1米以上的則使用4毫米的面板進行焊接工作;炷翙z查井模具簡介的主要目的及時將更多的模具知識推廣出去,讓人們更加了解、清楚模具的制作屬于環保、無污染類型、綠色的。在生產集水井模具的過程中,要注意噴漆過程產生的污染,所以樂豐模具都是在封閉的車間進行噴漆作業,然后經過無害化處理后排放。

      Catchment well mould is produced by precise welding technology. In order to ensure the quality of catchment well mould, it is usually classified according to the mould specifications required by customers, such as using 3mm steel plate with inner diameter less than 1m, and using 4mm panel with inner diameter more than 1m. The main purpose of the introduction of the mould for concrete inspection wells is to promote more knowledge of the mould in time, so that people can understand and understand that the manufacture of the mould is environmentally friendly, non-polluting and green. In the process of producing inspection well mould, attention should be paid to the pollution caused by spraying process, so Lefeng mould is sprayed in a closed workshop, and then discharged after harmless treatment.

      集水井模具的使用量不是很大,所以規格并沒有形成統一的標準,所以在模具生產的時候都是按照每個工程所需要的具體模板數量而定的。集水井模具加工標準不單單是短時間形成的,而是在長時間生產該模具的基礎上,無論是對焊接要求、鋼板要求、拼接要求等都進行了統一的規劃。在集水井模具制作上,要求不論是內模還是外模,在混凝土震動的時候都不會發生變形,而且每套模板使用次數需要達到一定的要求。集水井是同污水井相對應的,形狀基本上都是呈現方形的,所以不論是何種形狀的集水井,都必須按照標準的加工方式進行。

      The usage of the catchment well mould is not very large, so the specifications have not formed a unified standard, so the production of the mould depends on the number of specific templates required by each project. The processing standard of catchment well die is not only formed in a short time, but also unified planning for welding requirements, steel plate requirements and splicing requirements on the basis of long-term production of the die. In the production of water catchment well mould, it is required that neither the internal nor the external mould will be deformed when the concrete vibrates, and the number of times each set of formwork needs to meet certain requirements. Catchment wells correspond to sewage wells, and their shapes are basically square. Therefore, no matter what shape the catchment wells are, they must be processed in accordance with the standard way.


      【上一個】 閘槽井模具的設計特點 【下一個】 觀察井模具的施工方式


       · 集水井模具的環保工作是如何實施的

      檢查井鋼模具,檢查井模具,水泥檢查井模具——保定市晨澤模具制造有限公司 |隔離墩模具|排水溝模具|
      久久久噜噜噜久久熟女色_国产在线jyzzjyzz免费_2020国产情侣在线视频播放_8050二级一级全黄