檢查井模具的制作要求是遵循對于混凝土圓形井的具體圖紙要求或者施工型號而定的，檢查井模具從結構上看，按照機械與人工操作的不同，檢查井模具 圓形井模板的分塊數量是不同的，檢查井模具，電力檢查井模具，電纜檢查井模具廠家尤其是針對直徑比較大的，類似于蓄水池似的井體，分塊數量已經與普通檢查井相差非常多了。從樂豐模具制作檢查井模具的經驗來看，不管是多大型號的井，都是可以通過模具預制或者現場澆筑完成作業。
The manufacturing policy of inspection well mould is based on the specific drawing requirements or construction model of concrete circular well. From the perspective of structure, according to the different mechanical and manual operation, the number of blocks of inspection well mould circular well mould is different. The manufacturers of inspection well mould, electric inspection well mould and cable inspection well mould are especially for the ones with large diameter , similar to the reservoir like well body, the number of blocks has been very different from the ordinary inspection well. From the experience of Lefeng mould making inspection well mould, no matter how large the well is, the operation can be completed by mould prefabrication or on-site pouring.
檢查井模具是可以進行拆卸的，并且分為內模具和外模具這兩塊的，可以更好的去進行加工處理。舉個例子，像外模來說的話，它是使用同樣的兩塊鋼板進行焊接而成，也可以通過螺栓和卡扣的相互配接來將模板組裝在一起，而內模則與外模不同，內模具它是三塊不同的模具，其中的一塊檢查井鋼模具型號較小，整體呈現一個楔子的形狀，這樣子才能夠讓模具更好的組裝和拆卸。因為在脫模的時候，泥漿的凝固會帶來很大的壓力進行壓迫，而且它的外模型號較大可以很好地進行拆除，相比內模的話因為他受到的壓力會大一些，所以說我們將其中的一塊模具設置為楔形的形狀，這樣子在操作的時候就會非常的方便，簡單。常見的一些檢查井模具的型號在直徑一米到兩米之間，當然過大的話，在生產的時候就會非常的不方便，所以說模具的選擇要按照實際情況進行加工。
The inspection well mold can be disassembled and divided into internal mold and external mold, which can be processed better. For example, as for the outer mold, it is made of the same two steel plates by welding, and it can also be assembled together by matching the bolts and snaps, while the inner mold is different from the outer mold. The inner mold is three different molds, one of which is small in model and presents the shape of a wedge as a whole, so that the mold can be made Better assembly and disassembly. Because during demoulding, the solidification of slurry will bring a lot of pressure to compress, and its external mold model is larger, which can be removed well. Compared with the internal mold, because it will be under a greater pressure, so we set one of the molds to the shape of wedge, so it will be very convenient and simple to operate. Some common inspection well mould models are between one meter and two meters in diameter. Of course, if they are too large, they will be very inconvenient in production, so the mould selection should be processed according to the actual situation.
打印