檢查井模具是一種安裝埋置在地表以下土壤中與城市排水、排污管網相連接的配套設施,主要由井蓋模具、井筒模具、井室模具、連接孔模具等組成.檢查井排水高l效,污物不易滯留,減少堵塞.通用型檢查井模具，電力檢查井模具，排水檢查井模具規格：內徑1米水泥檢查井模具,外徑1.2米,高1米,收口70公分,檢查井模具采用的鋼板為4毫米厚,勒筋8毫米厚.一般檢查井模具的鋼板厚度在4-5毫米之間，檢查井應用非常廣泛，市政，小區，通信，電纜，電力，排水，污水，雨水等等。模具可現場切割、調整、適應各種安裝深度要求，有效降低成本，可全天侯施工。大大提高施工進度，施工效率是傳統檢查井的10-20倍以上。
The inspection well mould is a kind of supporting facility which is installed and buried in the soil below the surface and connected with the urban drainage and sewage pipe network, mainly composed of well cover mould, well bore mould, well chamber mould, connecting hole mould, etc. the inspection well has high drainage efficiency, the dirt is not easy to stay, and the blockage is reduced. General inspection well mould, electric inspection well mould, drainage inspection well mould specification: Cement inspection with an inner diameter of 1m The well inspection mold has an outer diameter of 1.2 meters, a height of 1 meter, and a closure of 70 cm. The steel plate used in the well inspection mold is 4 mm thick, and the rib is 8 mm thick. Generally, the steel plate thickness of the well inspection mold is between 4-5 mm. The well inspection is widely used in municipal, community, communication, cable, power, drainage, sewage, rainwater, etc. The mold can be cut, adjusted and adapted to various installation depth requirements on site, effectively reducing costs, and can be constructed all day. Greatly improve the construction progress, the construction efficiency is more than 10-20 times of the traditional inspection well.
檢查井作用主要是為城市地下基礎設施的供電、給水、排水、通訊、有線電視、煤氣管、路燈線路等維修,安裝方便而設置的.一般設在管道交匯處、轉彎處、管徑或坡度改變處、以及直線管段上每隔一定距離處,是便于定期檢查附屬構筑物。 檢查井模具是用來制作水泥預制件檢查井的專用鋼模具,主要應用于制造業和加工業,作為成型工具來使用.現在設計的污水檢查井模具加工效率高、使用方便、使用壽命長、節約成本,所以得到廣泛應用.雨水檢查井模具經過下料、裁剪、彎曲、切邊、修邊、焊接、拼接、噴漆等躲到工序,成型加工為合格的檢查井模具。
The manhole is mainly used for the maintenance of urban underground infrastructure, such as power supply, water supply, drainage, communication, cable TV, gas pipe, street light line, etc., which is easy to install. Generally, it is set at the intersection of pipes, turning, change of pipe diameter or slope, and at a certain distance on the straight pipe section, which is convenient for regular inspection of auxiliary structures. The inspection well mould is a special steel mould used to make the inspection well of cement prefabricated parts. It is mainly used in manufacturing and processing industry as a forming tool. Now the designed inspection well mould has high processing efficiency, convenient use, long service life and cost saving, so it has been widely used. The rainwater inspection well mould is processed, cut, bent, cut, trimmed, welded and assembled Connect, spray paint, etc. to the process, forming and processing into qualified inspection well mold.
打印