檢查井模具用的是鋼模板焊接，雖然造價有了提高，相比之下，質量的改變更應該值得引起注意，鋼模具的優勢明顯，做出來的混凝土預制產品密實度也是很高的，滿足了檢查井與管道銜接設計的要求，檢查井模具，方形檢查井模具，圓形檢查井模具根據排水管道的大小和數量的不同所以有的時候排水井的設計也有不同，這是為了讓排水的效果更好，有的還分成了上井室和下井室的組成部分，用部分帶動整體的流動性更好，收水口是在井室和井圈之間的位置，作用就是調整井室內徑尺寸，所以承壓力也是經得住考驗的。建成以后的排水檢查井，我們應該經過檢驗合格后再使用，它的質量規格形狀都應該符合規定。
The inspection well mould is welded with steel formwork. Although the cost has been improved, the change of quality should be paid more attention. The advantages of steel mould are obvious, and the compactness of the prefabricated concrete product is also very high, which meets the requirements of the connection design of inspection well and pipeline. According to the size and quantity of drainage pipeline, sometimes the design of drainage well is different There are also differences. This is to make the drainage effect better. Some of them are also divided into the upper chamber and the lower chamber. Using the part to drive the overall fluidity is better. The water intake is located between the chamber and the well circle. Its function is to adjust the inner diameter of the chamber, so the bearing pressure can stand the test. After the completion of the drainage inspection well, we should use it after passing the inspection, and its quality, specification and shape should meet the requirements.
檢查井模具重量輕，工人操作方便，省時省力;模具生產的水泥預制件產品表面光滑，強度高，不存在產品表面粗糙;通過模具做出來的產品尺寸精準，產品誤差不超過1毫米，更容易受施工單位質檢部門驗收通過。如今檢查井模具產品技術含量不時進步，制造周期不時縮短。用八個字形容我們現在的模具，尺寸規整，質優價廉。談到檢查井模具的使用壽命時候，不光要考慮到質量問題，質量合格以后我們在裝卸以及使用過程中都需要注意一些，才能夠保證模具的使用壽命。
The inspection well mould is light in weight, convenient for workers to operate, time-saving and labor-saving; the surface of the cement prefabricated parts produced by the mould is smooth, high in strength and free from rough surface; the size of the products made by the mould is accurate, and the product error is less than 1mm, which is more likely to be accepted by the construction unit quality inspection department. Nowadays, the technical content of inspection well mould products has been improved from time to time, and the manufacturing cycle has been shortened from time to time. We use eight words to describe our present mould, which is regular in size, high in quality and low in price. When it comes to the service life of the inspection well mould, not only the quality problems should be considered, but we need to pay attention to some in the process of loading, unloading and using after the quality is qualified, so as to ensure the service life of the mould.
打印