<dd id="juqeb"><optgroup id="juqeb"></optgroup></dd>

    1. <ol id="juqeb"></ol><em id="juqeb"><acronym id="juqeb"><input id="juqeb"></input></acronym></em>
    2. <em id="juqeb"></em>
    3. <dd id="juqeb"><pre id="juqeb"></pre></dd>
            產品列表
      路沿石鋼模具
      蓋板鋼模具
      標志樁鋼模具
      隔離墩鋼模具
      化糞池鋼模具
      U型槽鋼模具
      遮板鋼模具
      道軌模具
      護坡鋼模具
      制磚機
      檢查井鋼模具
      聲屏障鋼模具
      防撞墻鋼模具
      圍墻板模具
      方涵模具
      錨桿框架梁模具
      配重塊模具
      水泥三盤模具
      水泥預制件模具
            新聞中心
      · 整體式檢查井模具的作用及結...
      · 水泥檢查井模具的優勢特點
      · 觀察井模具的結構及特點
      · 檢查井模具的規格、尺寸、特...
      · 路面板模具在道路施工中的重...
      · 裝配式路面板模具的施工方式
            聯系我們

      電話:0312-8103818 18803129528
      傳真:0312-8103818
      在線QQ:107108222
      地址:保定市城東工業區

           新聞中心

      化糞池模具的生產方式

      [關閉該頁][設為首頁][添加收藏][發送朋友][打印][ ]

      化糞池模具生產特點是安裝簡單,脫模速度快可供循環使用,與傳統的化糞池鋼模具相比,不需要太多的安裝步驟,模具產品強度高,表面光滑質量好,使用壽命長,而且化糞池鋼模具尺寸標準,誤差很小,得到用戶的廣泛認可;S池鋼模具一般分為三節,每一節都有鏈接渠,防止出現錯位的情況;S池鋼模具的生產結構是組合式,如果選用一體合成的生產方式,模具的生產制作會增加難度,尺寸規格太大無疑會增加制作的難度,同時水泥制品模具的生產,以及生產過程中的運輸,都會增加難度。選擇組合式,運輸、安裝、生產、生產周期都得到了很好的改善,體現了組合式化糞池模具的優勢。

      The production features of the septic tank mold are simple installation, quick demoulding speed and recyclable use. Compared with the traditional septic tank steel mold, it does not need too many installation steps. The mold product has high strength, smooth surface, good quality and long service life. Moreover, the size of the septic tank steel mold is standard and the error is small, which is widely recognized by users. Septic tank steel mold is generally divided into three sections, each section has a link channel to prevent dislocation. The production structure of the septic tank steel mold is combined. If the integrated synthetic production mode is selected, the production and production of the mold will increase the difficulty. Too large size will undoubtedly increase the difficulty of production. At the same time, the production of the cement product mold and the transportation in the production process will increase the difficulty. The transportation, installation, production and production cycle of the combined septic tank have been improved, which embodies the advantages of the combined septic tank mold.


      方形水泥化糞池模具有八個角,模具上下總共分為3截,每節高度1米,內徑2米,外徑2.3米,一整套化糞池模具包括內外模、定位銷、凹凸槽、連接孔、上蓋、料帽、料斗。生產的水泥化糞池體積為12立方米,是市政、小區、工業企業普遍使用的一款水泥化糞池模具;S池的生產需要多種配件來配合,除了整體的主模外,還需要很多配件模具輔助。預制化糞池模具的生產方式就是預制生產,將混凝土灌入化糞池模板內,然后震動晾曬就可以等待拆模了,過程非常簡單,但是施工起來也是需要技術的,尤其是表面光潔度的掌握。按照現在化糞池的需求,除了常規立式的外, 新型開發的臥式化糞池逐漸推展開來。

      The square cement septic tank mold has eight corners. The upper and lower parts of the mold are divided into three sections. Each section is 1m high, 2m inner diameter and 2.3m outer diameter. A complete set of septic tank mold includes internal and external mold, locating pin, concave convex groove, connecting hole, upper cover, material cap and hopper. The volume of cement septic tank produced is 12 cubic meters, which is a kind of cement septic tank mold commonly used by municipal, community and industrial enterprises. The production of septic tank needs a variety of accessories to cooperate. In addition to the overall main mold, it also needs a lot of accessories mold assistance. The production mode of prefabricated septic tank mold is prefabrication production. Concrete is poured into the septic tank template, and then vibration and air drying can wait for formwork removal. The process is very simple, but the construction also needs technology, especially the mastery of surface finish. According to the current needs of septic tanks, in addition to the conventional vertical, the new development of horizontal septic tanks is gradually expanding.


      【上一個】 拱形骨架模具的使用范圍分析 【下一個】 井體模具的生產結構介紹


       · 化糞池模具的生產方式

      檢查井鋼模具,檢查井模具,水泥檢查井模具——保定市晨澤模具制造有限公司 |隔離墩模具|排水溝模具|
      久久久噜噜噜久久熟女色_国产在线jyzzjyzz免费_2020国产情侣在线视频播放_8050二级一级全黄