<dd id="juqeb"><optgroup id="juqeb"></optgroup></dd>

    1. <ol id="juqeb"></ol><em id="juqeb"><acronym id="juqeb"><input id="juqeb"></input></acronym></em>
    2. <em id="juqeb"></em>
    3. <dd id="juqeb"><pre id="juqeb"></pre></dd>
            產品列表
      路沿石鋼模具
      蓋板鋼模具
      標志樁鋼模具
      隔離墩鋼模具
      化糞池鋼模具
      U型槽鋼模具
      遮板鋼模具
      道軌模具
      護坡鋼模具
      制磚機
      檢查井鋼模具
      聲屏障鋼模具
      防撞墻鋼模具
      圍墻板模具
      方涵模具
      錨桿框架梁模具
      配重塊模具
      水泥三盤模具
      水泥預制件模具
            新聞中心
      · 整體式檢查井模具的作用及結...
      · 水泥檢查井模具的優勢特點
      · 觀察井模具的結構及特點
      · 檢查井模具的規格、尺寸、特...
      · 路面板模具在道路施工中的重...
      · 裝配式路面板模具的施工方式
            聯系我們

      電話:0312-8103818 18803129528
      傳真:0312-8103818
      在線QQ:107108222
      地址:保定市城東工業區

           新聞中心

      污水井模具的主要組成部分介紹

      [關閉該頁][設為首頁][添加收藏][發送朋友][打印][ ]

      污水井模具屬于檢查井模具的一種,整體是由三部分組成的:預留孔,調節圈,收口。預留孔是用來連接地下容易發生故障而定期需要檢修與維護的地方,如地下管道接頭,彎頭處,電纜等等。中間部分是調節圈,調節圈顧名思義就是用來調節整個井體在地下的高度,能夠適應各種安裝深度要求,有效降低了安裝成本。整個井體的最上面就是收口部分,收口是與地面相齊平最后加上與收口直徑相同的井蓋,這樣整個埋在地下的檢查井就和地面保持齊平了。

      Sewage well mold is a kind of inspection well mold, the whole is composed of three parts: reserved hole, adjusting ring and closing. Reserved holes are used to connect underground places that are prone to failure and need regular maintenance, such as underground pipe joints, elbows, cables, etc. The middle part is the regulating ring, which, as the name implies, is used to adjust the height of the whole well in the underground, which can meet the requirements of various installation depths and effectively reduce the installation cost. The top part of the whole well body is the closing part, which is flush with the ground. Finally, a manhole cover with the same diameter as the closing in diameter is added, so that the whole buried inspection well is flush with the ground.
        
      污水井模具目前還沒有單一規定的尺寸,因為地區的不同,施工方案的不同,所使用的檢查井也會不同一般的檢查井模具都是根據客戶需求所定制的,以目前來看定做最多尺寸的檢查井模具內徑為80公分和內經為1米的。 檢查井模具的屬于重型模具的一種,檢查井預制件的體積也是比較大的,所以目前檢查井模具還沒有塑料的,玻璃鋼模具成本相對又高,所以檢查井模具一般以鋼模具為主,生產的污水檢查井模具材料全部采用優質的上等板材為主料,外加板筋做固定,加強主板硬度,有效提高了模具的使用壽命。

      At present, there is no single specified size of the sewage well mold. Because of the different regions and construction schemes, the inspection wells used will be different. Generally, the inspection well molds are customized according to the needs of customers. At present, the inner diameter of the inspection well mold with the largest size is 80 cm and the inner diameter is 1 m. Inspection well mold belongs to a kind of heavy-duty mold, and the volume of prefabricated parts of inspection well is relatively large, so there is no plastic for inspection well mold at present, and the cost of FRP mold is relatively high. Therefore, the inspection well mold is generally made of steel mold, and the sewage inspection well mold materials are all made of high-quality plate as the main material, and the additional plate reinforcement is used to fix the main board The service life of the die is effectively improved.


      【上一個】 水泥檢查井模具的使用過程介紹 【下一個】 檢查井鋼模具如何正確使用


       · 污水井模具使用的具體方法 · 污水井模具的生產制作過程
       · 污水井模具的主要組成部分介紹 · 污水井模具如何正確合理的使用
       · 污水井模具的主要作用

      檢查井鋼模具,檢查井模具,水泥檢查井模具——保定市晨澤模具制造有限公司 |隔離墩模具|排水溝模具|
      久久久噜噜噜久久熟女色_国产在线jyzzjyzz免费_2020国产情侣在线视频播放_8050二级一级全黄