<dd id="juqeb"><optgroup id="juqeb"></optgroup></dd>

    1. <ol id="juqeb"></ol><em id="juqeb"><acronym id="juqeb"><input id="juqeb"></input></acronym></em>
    2. <em id="juqeb"></em>
    3. <dd id="juqeb"><pre id="juqeb"></pre></dd>
            產品列表
      路沿石鋼模具
      蓋板鋼模具
      標志樁鋼模具
      隔離墩鋼模具
      化糞池鋼模具
      U型槽鋼模具
      遮板鋼模具
      道軌模具
      護坡鋼模具
      制磚機
      檢查井鋼模具
      聲屏障鋼模具
      防撞墻鋼模具
      圍墻板模具
      方涵模具
      錨桿框架梁模具
      配重塊模具
      水泥三盤模具
      水泥預制件模具
            新聞中心
      · 整體式檢查井模具的作用及結...
      · 水泥檢查井模具的優勢特點
      · 觀察井模具的結構及特點
      · 檢查井模具的規格、尺寸、特...
      · 路面板模具在道路施工中的重...
      · 裝配式路面板模具的施工方式
            聯系我們

      電話:0312-8103818 18803129528
      傳真:0312-8103818
      在線QQ:107108222
      地址:保定市城東工業區

           新聞中心

      水泥檢查井模具的組成部分介紹

      [關閉該頁][設為首頁][添加收藏][發送朋友][打印][ ]

      水泥檢查井模具整體分為三部分:預留孔,調節圈,收口。井體的底下是預留孔,預留孔是用來連接那些需要日后檢修,與維護的地方,也是容易出現故障的地方。中間部分是調節圈,調節圈顧名思義就是用來調節整個井體在地下的高速,以適用各種安裝環境,這樣做能夠有效的降低成本,提高效率。最上面是收口部分,就是與地面連接的地方,上面安裝上與收口直徑相同的井蓋,這樣一整套的檢查井就安裝完成了。

      The mould for cement inspection well is divided into three parts: reserved hole, adjusting ring and necking. The bottom of the well body is a reserved hole, which is used to connect those places that need future repair and maintenance, and is also prone to failure. The middle part is the adjusting ring, which is used to adjust the underground high speed of the whole well body to adapt to various installation environments, which can effectively reduce the cost and improve the efficiency. The top is the closing part, which is the place connected with the ground. The manhole cover with the same diameter as the closing is installed on it, so that a complete set of inspection wells are installed.

      水泥檢查井模具的操作步驟是按照模具的常用外形來說,從廠家制作方面來講,通常制作的檢查井模具是非常有特征的,兩側帶有孔,而且在制作檢查井初期使用的鋼板厚度是隨著模具的規格大小變化的。無論是預制檢查井渠還是現澆的檢查井,都是按照客戶提供的鋼板要求進行下單。檢查井模具由兩部分組成,外模和內模。模具的尺寸大小可以根據要求定制。鋼材外模使用兩塊厚實均勻的面板與強度高的筋板使用專業的電焊機進行焊接,做出來的外模穩定性好,非常牢固,在后期澆筑混凝土時不易變形、開裂,使用壽命較長,脫模較為方便、快捷。內模由三塊鋼板構成,一塊尺寸小一些的,兩塊尺寸大點的,方便脫模。因為檢查井在一些特殊工程中需求量會很大,可以根據提供的圖紙進行加工,注意細節的問題,提前留出預留孔,進行大批量的生產。

      The operation steps of the cement inspection well mold are according to the common shape of the mold. In terms of the manufacturer's production, the inspection well mold is usually very characteristic, with holes on both sides, and the thickness of the steel plate used in the initial stage of the production of the inspection well changes with the size of the mold. No matter prefabricated inspection well canal or cast-in-place inspection well, orders are placed according to the steel plate requirements provided by customers. The inspection well mould is composed of two parts, external mould and internal mould. Mold size can be customized according to the requirements. The steel external form uses two thick and uniform panels and high-strength reinforced plates, which are welded by professional electric welding machine. The external form has good stability and is very firm. It is not easy to deform and crack when pouring concrete in the later stage, and has a long service life. Demoulding is more convenient and fast. The internal mold is composed of three steel plates, one smaller and two larger, which is convenient for demoulding. Because inspection wells are in great demand in some special projects, they can be processed according to the drawings provided. Pay attention to the details and reserve holes in advance for mass production.


      【上一個】 污水井模具使用的具體方法 【下一個】 檢查井模具廠家祝大家牛年開工大吉


       · 水泥檢查井模具的優勢特點 · 檢查井模具-電力檢查井模具-水泥檢查井模具廠家
       · 水泥檢查井模具的組成部分介紹 · 檢查井模具廠家祝大家牛年開工大吉
       · 水泥檢查井模具的使用過程介紹 · 預制檢查井模具的使用過程及作用
       · 預制檢查井模具的生產標準有哪些 · 預制檢查井模具的制作步驟

      檢查井鋼模具,檢查井模具,水泥檢查井模具——保定市晨澤模具制造有限公司 |隔離墩模具|排水溝模具|
      久久久噜噜噜久久熟女色_国产在线jyzzjyzz免费_2020国产情侣在线视频播放_8050二级一级全黄